Name: Original Printhead 6330/6530 407933 53mm Model KCE-53-12PAT1 for Videojet Printer Thermal Label Barcode TTO
Price: 428.09 USD
Availability: OutOfStock

Model	For Videojet 6330/6530 53mm KCE-53- 12PAT1-VJTN /407933
Warranty	3 months or 30km
Original/Compatable	Original
Printer type	Thermal Printer
Quality	Excellent 100% Tested

1. Q: What is the working principle of a thermal transfer print head? A: The interior of the print head is composed of tiny heating elements (dot matrix). After power is turned on, the heating elements are selectively heated according to the printing signal, so that the ribbon coating melts and transfers to the surface of the medium to form a clear image or text. 2. Q: What is the difference between thermal transfer and thermal printing? A: Thermal transfer printing: requires a ribbon, and the printed content is durable, suitable for long-term labels (such as logistics and warehousing). Thermal printing: no ribbon is required, and the thermal paper is directly heated to develop color, but the inside is easy to fade (such as cash register receipts). 3. Q:What are the advantages of Codewel compatible print heads? A: ① Ultra-high quality, all accessories are 100% brand new, made in China. ② Adopt thin film technology and independently develop internal circuit board design. ③ Provide the same warranty as the original print head. ④ With a 20-year experience R&D team in the first-class Rohm company, the quality of the print head can be controlled. 4. Q: How to correctly install the thermal transfer print head? A: ① Turn off the power of the device and remove the old print head according to the steps in the instruction manual. ② Clean the installation area to ensure that there is no dust or residue. ③ Align the new print head and fix the screws (avoid over-tightening). Calibrate the pressure after installation to ensure that the print head and the rubber roller are in uniform contact. 5. Q:What should I do if the printing density is uneven? A:① Check whether the print head pressure is balanced and adjust the rubber roller pressure. ② Clean the surface of the print head. ③ Confirm that the ribbon matches the media (such as wax-based, mixed-based or resin-based carbon ribbon). 6. Q: How often do you need to clean the print head? A: ① Regular use: Clean after each roll of ribbon is replaced or at the end of each day's work. ②High-load use: clean every 2-3 hours. ③Clean immediately when you find that the print quality has deteriorated. 7. Q: How to clean the print head correctly? A: ①Use a special cleaning pen or non-woven cloth to dip in a small amount of isopropyl alcohol (do not use water or alcohol). ②Gently wipe the surface of the print head in the same direction to avoid scratches.After cleaning, wait for it to dry completely before turning on the machine. 8. Q: How long is the life of the print head? A: Depending on the frequency of use, media type and maintenance, it is generally 30-50 km in length, and some industrial print heads can print up to 100 km in length. 9. Q: Can the print head be repaired? A: The print head is a precision electronic component and is usually not repairable. It is recommended to replace it directly. 10. Q: What is the DPI of the print head? How to choose DPI? A: DPI is resolution: measured in DPI (dots per inch), common ones are 203dpi, 300dpi, 600dpi, etc. The higher the resolution, the finer the print. 203dpi: basic logistics labels, thick barcodes (such as shipping labels). 300dpi: fine barcodes (such as medical labels), small text or simple graphics. 600dpi: high-precision images, micro text (such as electronic component labels, anti-counterfeiting labels).

People who viewed this also viewed